User Panel
[#1]
Originally Posted By M-60: https://photos.smugmug.com/Shooting/Shotgun-stuff/Misc-shotgun/i-33P7SPF/0/FVq2wbjp6ZKP3F7bgQmMwz6hSZ3CHz7pwcCbR92xp/XL/IMG_6394-XL.jpg https://photos.smugmug.com/Shooting/Shotgun-stuff/Misc-shotgun/i-mBxTSbr/0/CQRgmrfGpBrx9GnVcqRCjCJLPFP7KH3SfTfKdvRTK/XL/IMG_6396-XL.jpg https://photos.smugmug.com/Shooting/Shotgun-stuff/Misc-shotgun/i-c5vNSqX/0/FVwvxh9BsntT6FNk467sJjLn6pL2Wwkgk4vW92Mn3/XL/IMG_6397-XL.jpg View Quote Great pictures! Thanks! I am still thinking about ordering in some extra shot drop tubes. Comparing their lengths to the tube that is installed now, and then cutting one of them down a little at a time until : 1. The wad is sitting at the correct height AND 2. The shot bar travels the full stroke |
|
|
[Last Edit: WeimaranerDad]
[#2]
If I was on the ball the other night while the machine was still dialed in for 9/8ths loads and those WT12 wads, I should have used the inside jaws on my dial calipers:
Attached File To get the measurement here: Attached File And written it down or taken a pic of the dial caliper’s display. EDIT: there is one other thing I need to try….adjusting the shot bar’s “gate valve bolt” and the set screw. As it is now, the set screw is levering the “gate” up into the white rubber “snubber”. I have to wonder if that is causing enough drag on the shot bar to keep it from going its full stroke. I am ending up with a white powdery residue on top of the shot bar and inside the wad. |
|
|
[Last Edit: mannyCA]
[#3]
great thread!
We did a whole series on powder, wads, hull life and how to calculate your recipe. Hey, How Many Times Can You Load That Hull? - Black Powder Shotshells playlist with the whole series Shotshell Loading Playlist lots of real world data, 12, 20 and 410 included. check it out. |
|
"when tyranny becomes law rebellion becomes duty"
|
[#4]
@mannyCA Definitely have liked your how many times vids for hulls.
|
|
|
[#5]
Originally Posted By mannyCA: great thread! We did a whole series on powder, wads, hull life and how to calculate your recipe. https://www.youtube.com/watch?v=mED3f-GBdTs playlist with the whole series Shotshell Loading Playlist lots of real world data, 12, 20 and 410 included. check it out. View Quote Cheers for that! |
|
Death to quislings.
|
[Last Edit: AeroE]
[#6]
The Downrange wads I loaded were longer than Clay busters and interfered with the mechanism on my Grand loader.
BPI sells cards for filling out a cup (install under the shot), and I made a bunch that I cut out of thick foamish craft paper for some obsolete 20 gauge wads. I made a punch from a piece of 1/2 inch 4130 tubing. |
|
Keep your powder dry, and watch your back trail.
|
[#7]
Ultimate Reloader just put out a new video and it just so happens to be on the Dillon SL900:
Shotshell Reloading with the Dillon SL900 - Hands On! |
|
|
[Last Edit: WeimaranerDad]
[#8]
EUREKA!
I figured it out. Finally. It was the shot bar bolt and its set screw. If you look really closely in this pic, you’ll see that the “gate” is levered up slightly above flush of the shot bar: Attached File Then in this next pic, you can see that it was scraping across the white rubber “snubber” that it was leaving a powdery residue on the shot bar. Attached File Since it was dragging so hard across the “snubber”, the shot bar wasn’t able to go the full stroke: So I went to the hardware store, and bought a new bolt: Attached File New bolt on top. The original Dillon bolt is on bottom. That groove and the set screw’s pressure from above was levering it up. This is what the shot bars look like: Attached File |
|
|
[#9]
Wow. I've never had that issue. Now, I'll have to look.
|
|
“How dare we whine at our inevitable return to that prior state from which the vast majority have never stirred?”
|
[Last Edit: WeimaranerDad]
[#10]
Originally Posted By M-60: Wow. I've never had that issue. Now, I'll have to look. View Quote When I was putting it all back together, one of the things I did was leave the black set screw loose when I inserted the shot bar into the dispenser. Once I was sure the “gate” was under the rubber “snubber”, then I tightened down the set screw. I also sprinkled some graphite powder on top of the shot bar and worked it back and forth a few times by hand before re-connecting the bell crank arm and white plastic “bushing” or “cube”. For those following along who are wondering what this rubber “snubber is…. Attached File That’s ^^^ a Mec shot bar. That white dog bone shaped looking thing is made out of rubber. Without it, the shot bar would try to shear the extra lead pellets in half. On the Dillon SL900, the rubber “snubber” is inside the shot dispense right above where the shot bar travels. A rubber “snubber” allows the miscellaneous extra shot to roll under or over without getting smeared or sheared in half while the shot bar shuttles back and forth. EDIT: I did switch over to the gold colored Remington Nitro 27 hulls. My crimps were looking way better with those versus the gray Winchester AAHS’s. Besides, I am thinking of saving the grays for buckshot loads. |
|
|
[Last Edit: WeimaranerDad]
[#11]
This is a screenshot from an old Power Factor Show. Steve is holding up the Dillon version of the rubber “snubber”:
Attached File It turns black after a while because of the lead shot and/or the graphite coating the shot. Fast forward to the 10 minute and 40 second mark: Episode 267 - Shooting Chandelle Targets & Tweaking the SL900 Shot Bar EDIT: the new bolts that I bought are 1/4X28tpi by 2 inches long. The hardware store only had stainless, but it turns out that the new bolt and set screw both use the same size allen wrench. What Dillon really should do is have the black set screw come in horizontally from the left side of the shot bar as you are facing the press. They should also use a fully threaded shaft bolt….put some sort of “garter” or set screw in the “gate” to let the bolt spin freely ….and then thread the back end of the bar. Whatever that distance is from the back of the bar to the head of the bolt, that is how far open the “gate” is. |
|
|
[Last Edit: WeimaranerDad]
[#12]
I finally made it to the range today.
I made 25 of the 3/4 ouncers, and in the process dialed in the crimp with the Dillon. Here is a pic….the worst crimps are in the front row….they get better towards the back: Attached File I made it a point to shoot the crappy looking ones first on the trap field. Ya…know…those 3/4 ouncers broke those trap birds just as well as the 9/8 ouncers. I only shot about half of the 3/4’s, then I switched over to the 20 gauge. I am going to see how the other half does over a week or so….to see if they open like the ones in the front row. EDIT: and yes, they are noticeably softer on the shoulder. |
|
|
[#13]
Is it fairly easy to cut down empty hulls to make mini-shells?
|
|
Death to quislings.
|
[Last Edit: johnh57]
[#14]
I think you want a little more depth on the crimp so they don't poof out over time. I try for a crimp depth about equal to the thickness of a dime.
These are 7/8 oz, 1350 fps bunker loads. These hulls are old and have been reloaded many, many times. Attached File |
|
|
[Last Edit: WeimaranerDad]
[#15]
Originally Posted By johnh57: I think you want a little more depth on the crimp so they don't poof out over time. I try for a crimp depth about equal to the thickness of a dime. These are 7/8 oz, 1350 fps bunker loads. These hulls are old and have been reloaded many, many times. https://www.ar15.com/media/mediaFiles/335829/Resizer_17146092838301_jpg-3203260.JPG View Quote Jesus dude! Nice press! Yeah, about a third of the way through those 25 today, I figured out that I was adjusting the final crimp die wrong. In a way, it kinda reminds me of the 3 die sets that RCBS sells for metallic pistol reloading. The RCBS bullet seating die (for pistol) can also be used to put s taper crimp onto the case mouth. Wellllll….with the final crimp die/station on the SL900, I was giving it too much taper and not enough “nose seating”. So there were a few hulls that I buckled the sides on. EDIT: so I threw those in my “to be torn apart later pile. I unscrewed the final crimp die a lot, and gradually started dialing the center “seating stem” down. There was a recent thread on trapshooters.com about Hodgdon’s data on how crimp depth affects chamber pressure and velocity: Attached File So over at TS.com somebody posted a pic of two hulls. One with a dime sitting on top. Dimes are too big in diameter to actually fit down in the crimp. The other hull had a washer down inside the crimp. |
|
|
[#16]
Originally Posted By WeimaranerDad: I finally made it to the range today. I made 25 of the 3/4 ouncers, and in the process dialed in the crimp with the Dillon. Here is a pic….the worst crimps are in the front row….they get better towards the back: https://www.ar15.com/media/mediaFiles/369122/963B4290-2F97-4538-8634-1545607F1093_jpe-3203163.JPG I made it a point to shoot the crappy looking ones first on the trap field. Ya…know…those 3/4 ouncers broke those trap birds just as well as the 9/8 ouncers. I only shot about half of the 3/4’s, then I switched over to the 20 gauge. I am going to see how the other half does over a week or so….to see if they open like the ones in the front row. EDIT: and yes, they are noticeably softer on the shoulder. View Quote I thought you'd like 'em. I don't shoot trap, but on the Skeet field, they're fantastic. I've done 200 rounds in a afternoon shooting those and there's no recoil fatigue at all. |
|
“How dare we whine at our inevitable return to that prior state from which the vast majority have never stirred?”
|
[#17]
Originally Posted By backbencher: Is it fairly easy to cut down empty hulls to make mini-shells? View Quote I don’t know. I never tried. If guys are making their own mini-shells, I don’t know how they are crimping them. Because most presses are set up for 2.75” shells. I can’t speak for all presses, but at least with the Dillon SL900 and its tip out wad guide: Attached File The wad starter is at a fixed or set distance for 2.75” long shells. Plus, I would need to see legitimate published and tested load recipes from some place reputable. |
|
|
[#18]
Well…. This is aggravating:
Attached File Those two are standing higher than the rest because: Attached File The other crimps look better: Attached File Not good. Not perfect. Just a little better. I have been doing a lot of reading on trapshooters.com about the SL900 and crimps. Dillon makes a pre-crimp “die” that is smooth on the inside. It was originally meant for the very old skool paper hulls. And supposedly everybody who got a “paper crimp die” ended up with better crimps in their plastic hulls. Supposedly… |
|
|
[#19]
There were a few shells that got goofed up in the pre-crimp die last night:
Attached File That’s the pre-hemorhoid stage ^^^. I was able to catch about 3 of them before they really got hemorhoid'ed in the final crimp die. The three that I did catch I was able to unfold the “petals” and run it back up into the pre-crimp. Then they came out looking like normal. The one pictured above….I tried to unfold it to save it 2 times, but the plastic just had too much memory to it. I ended up dumping out the shot…back into the shot bucket. Then I used needle nose pliers to pull the wad. The powder got dumped back into the Dillon powder measure. That hull got tossed into the trash can. I’ll be installing that smooth pre-crimp die insert later today. |
|
|
[#20]
Originally Posted By WeimaranerDad: There were a few shells that got goofed up in the pre-crimp die last night: https://www.ar15.com/media/mediaFiles/369122/1FA515D7-CBE6-4564-B658-66A26B22B9A3_jpe-3207906.JPG That’s the pre-hemorhoid stage ^^^. I was able to catch about 3 of them before they really got hemorhoid'ed in the final crimp die. The three that I did catch I was able to unfold the “petals” and run it back up into the pre-crimp. Then they came out looking like normal. The one pictured above….I tried to unfold it to save it 2 times, but the plastic just had too much memory to it. I ended up dumping out the shot…back into the shot bucket. Then I used needle nose pliers to pull the wad. The powder got dumped back into the Dillon powder measure. That hull got tossed into the trash can. I’ll be installing that smooth pre-crimp die insert later today. View Quote I just let 'em mash and shoot 'em. Toss it the next time around. They aint pretty, but they go bang and break clays. |
|
“How dare we whine at our inevitable return to that prior state from which the vast majority have never stirred?”
|
[Last Edit: Combat_Diver]
[#21]
I had a used MEC 600 that I had for over 30 yrs before setting up. Mainly use it for 12 ga buckshot loads with .311 and .375" round balls. Not worth the shot for 1 1/8 as Dove loads were cheap enough in the past. A decade ago I parked a RV on the Ft Bragg skeet range for several weeks while training there. Picked up more hulls than I'll ever use. Got a 55 gal trash can full of Federal Top Gun once fired. I reload them twice then chuck them. Clay boxes full of AA and Rem STS hulls too. Just bought a 25lb bag of #5 for field loads for my 870. Thats where I'll save more money. Need to reload later for .410 and 16 ga.
|
|
De Oppresso Liber
Iraq: 91,03,04,05,06,08,09,15,16,22,23,24' Afghanistan: 09,10,11',14',17',18',19',20'&21' |
[Last Edit: M-60]
[#22]
|
|
“How dare we whine at our inevitable return to that prior state from which the vast majority have never stirred?”
|
[Last Edit: Combat_Diver]
[#23]
Stated earlier mainly for buckshot loads. Lee .311" round balls
Attached File .375" round ball, both of my molds were for cap and ball revolvers. Attached File Mixing RBs, 1 oz is 1 oz. Powder is usually Unique. Attached File Attached File |
|
De Oppresso Liber
Iraq: 91,03,04,05,06,08,09,15,16,22,23,24' Afghanistan: 09,10,11',14',17',18',19',20'&21' |
[#24]
Originally Posted By M-60: Just for fun, I put a new AA hull in my '900 that's currently set up for Rem STS, Gun Club, Nitro's. Results? https://photos.smugmug.com/Shooting/Shotgun-stuff/Misc-shotgun/i-Z59Gcdz/0/DCMsv9RR9B6wcwVxMFtvWCpzm2tRMH92wc2HSJ4jr/XL/IMG_6467-XL.jpg https://photos.smugmug.com/Shooting/Shotgun-stuff/Misc-shotgun/i-bT4K9BF/0/D9MbCt2ZQSDFbm4xDztGwcsKjRZft2hMG6Zj5mwkt/XL/IMG_6466-XL.jpg Basically identical to the Rem hulls. 1oz #9's over 7/8 Claybuster wad, 18 Grains of Tite Group. View Quote Somebody on another forum messaged me to say they were having really good luck with those Diamond hulls: Attached File |
|
|
[Last Edit: WeimaranerDad]
[#25]
Originally Posted By Combat_Diver: Stated earlier mainly for buckshot loads. Lee .311" round balls https://www.ar15.com/media/mediaFiles/32677/_311_round_ball_jpg-3208920.JPG .375" round ball, both of my molds were for cap and ball revolvers. https://www.ar15.com/media/mediaFiles/32677/_375_round_ball_jpg-3208921.JPG Mixing RBs, 1 oz is 1 oz. Powder is usually Unique. https://www.ar15.com/media/mediaFiles/32677/12_ga_0_and_0000_buck_JPG-3208922.JPG https://www.ar15.com/media/mediaFiles/32677/12_ga_0000_tgt_JPG-3208925.JPG View Quote You’re a good salesman! I just bought a Lee .310 diameter ball 6 cavity mold and handles from a place called Track of the Wolf. |
|
|
[Last Edit: WeimaranerDad]
[#26]
WOOT WOOT!
I got my buckshot mold and handles today; Attached File ! EDIT: going back a year or two, another forum member recommended this mould to me because I won’t have to worry about cutting multiple pellets apart from each other with either wire cutters or dog toe nail clippers. Plus, the .310” size fits just right inside a Winchester AAHS hull/wad….3 by 3 by 3 stack. |
|
|
[#27]
Originally Posted By WeimaranerDad: WOOT WOOT! I got my buckshot mold and handles today; https://www.ar15.com/media/mediaFiles/369122/2419B8A1-57AE-4BDA-954B-71DABE416669_jpe-3211720.JPG ! EDIT: going back a year or two, another forum member recommended this mould to me because I won’t have to worry about cutting multiple pellets apart from each other with either wire cutters or dog toe nail clippers. Plus, the .310” size fits just right inside a Winchester AAHS hull/wad….3 by 3 by 3 stack. View Quote Are you going to tumble or powder coat? I water harden mine and put them in the tumbler with .454 round balls. For me, it seems like I get better results with different diameters. Adding buffer helps for my non coated, just make sure about load data. |
|
|
[#28]
Originally Posted By Chukar: Are you going to tumble or powder coat? I water harden mine and put them in the tumbler with .454 round balls. For me, it seems like I get better results with different diameters. Adding buffer helps for my non coated, just make sure about load data. View Quote I was thinking about just adding graphite powder to the tumbler to coat those .310” pellets. |
|
|
[#29]
Originally Posted By WeimaranerDad: WOOT WOOT! I got my buckshot mold and handles today; https://www.ar15.com/media/mediaFiles/369122/2419B8A1-57AE-4BDA-954B-71DABE416669_jpe-3211720.JPG ! EDIT: going back a year or two, another forum member recommended this mould to me because I won’t have to worry about cutting multiple pellets apart from each other with either wire cutters or dog toe nail clippers. Plus, the .310” size fits just right inside a Winchester AAHS hull/wad….3 by 3 by 3 stack. View Quote Nice! Beats my two cav mold |
|
De Oppresso Liber
Iraq: 91,03,04,05,06,08,09,15,16,22,23,24' Afghanistan: 09,10,11',14',17',18',19',20'&21' |
[#30]
Originally Posted By WeimaranerDad: EDIT: going back a year or two, another forum member recommended this mould to me because I won’t have to worry about cutting multiple pellets apart from each other with either wire cutters or dog toe nail clippers. Plus, the .310” size fits just right inside a Winchester AAHS hull/wad….3 by 3 by 3 stack. View Quote Works even better with 2 molds in rotation. |
|
|
[Last Edit: WeimaranerDad]
[#31]
Originally Posted By chumly2071: Works even better with 2 molds in rotation. View Quote I fired up my casting pot tonight: Attached File I had pushed my casting bench way off in the corner of the cellar. It had probably been about 12 to 14 years since I last turned the pot on. There were sheet metal ducts riight in the way, so I was all stooped over while trying to cast. Just a few minutes yielded this: Attached File Putting 9 pellets on the scale got me this: Attached File |
|
|
[Last Edit: WeimaranerDad]
[#32]
Last night, I took out the 8 point pre-crimp insert:
Attached File And replaced it with the smooth insert meant for paper hulls: Attached File From the side it looks like this: Attached File VOILA! No more hemorrhoid’ed crimps. EDIT: it is Dillon part #16748 |
|
|
[#33]
Originally Posted By WeimaranerDad: Last night, I took out the 8 point pre-crimp insert: https://www.ar15.com/media/mediaFiles/369122/ED48C761-F055-4976-8D1B-8F040868C75E_jpe-3213477.JPG And replaced it with the smooth insert meant for paper hulls: https://www.ar15.com/media/mediaFiles/369122/BF8441A4-9346-428E-B07C-CBD582D687BF_jpe-3213479.JPG From the side it looks like this: https://www.ar15.com/media/mediaFiles/369122/9817960D-048B-459B-A38C-2BC201AE368B_jpe-3213483.JPG VOILA! No more hemorrhoid’ed crimps. EDIT: it is Dillon part #16748 View Quote Hmmm. I might have to try that. |
|
“How dare we whine at our inevitable return to that prior state from which the vast majority have never stirred?”
|
[Last Edit: AeroE]
[#34]
Originally Posted By WeimaranerDad: There were a few shells that got goofed up in the pre-crimp die last night: https://www.ar15.com/media/mediaFiles/369122/1FA515D7-CBE6-4564-B658-66A26B22B9A3_jpe-3207906.JPG That's the pre-hemorhoid stage ^^^. I was able to catch about 3 of them before they really got hemorhoid'ed in the final crimp die. The three that I did catch I was able to unfold the "petals" and run it back up into the pre-crimp. Then they came out looking like normal. The one pictured above .I tried to unfold it to save it 2 times, but the plastic just had too much memory to it. I ended up dumping out the shot back into the shot bucket. Then I used needle nose pliers to pull the wad. The powder got dumped back into the Dillon powder measure. That hull got tossed into the trash can. I'll be installing that smooth pre-crimp die insert later today. View Quote I have not tried to rescue a crimp that mangled in a 12 gauge hull, they're too cheap and plentiful to fool with. |
|
Keep your powder dry, and watch your back trail.
|
[#35]
Originally Posted By AeroE: I made a tool for reopening fired 28 gauge hulls. I tapered a wood dowel mounted on a screw that is turned by a drill press to warm the crimp enough to open the end. I have not tried to rescue a crimp that mangled in a 12 gauge hull, they're too cheap and plentiful to fool with. View Quote In the past, I have used the cork screw in a Swiss army knife to pull the crimps open. Do you have any pics of this tapered dowel gadget? I have a big/tall .50 cal can full of gold Nitro 27 dummies that I need to break back down. |
|
|
[Last Edit: FB41]
[#36]
Originally Posted By WeimaranerDad: In the past, I have used the cork screw in a Swiss army knife to pull the crimps open. Do you have any pics of this tapered dowel gadget? I have a big/tall .50 cal can full of gold Nitro 27 dummies that I need to break back down. View Quote @WeimaranerDad You get the Spin Doctor tool from Ballistic Products. I imagine the tool @AeroE made looks similar. |
|
<placeholder for something good in the future>
|
[#38]
Originally Posted By AeroE: Similar, not as much taper and sized for 28 gauge hulls. The spindle through the center is a long screw, probably a #8. The crimps start to close after the first reload so nothing will fit through the opening. https://www.ar15.com/media/mediaFiles/348/1000000839-3215606.jpg Ignore the extra nuts. Drill the hole first, then shape around that centerline. @WeimaranerDad @FB41 View Quote Good idea. Wish I woulda thought of that before I bought the 2 Spin Doctors (12-20 & 28-.410). I mostly use them to iron out roll crimps after firing TSS loads. |
|
<placeholder for something good in the future>
|
[#39]
|
|
|
[#40]
Attached File
Dad found these cans of shot in his store room and gave them to me today. He used to reload shotgun shells a long time ago. A whole bunch of #5 shot and the can on the right is about half full of 7.5 or 8, not sure exactly as both numbers are written on the can. I don't know what press he has, but its at his buddies house and I can get it whenever I want. I have a bunch of 20 gauge AA hulls I've saved over the years, and I think some of the powder I have would be suitable for shotguns. Only real cost would be primers, wads, and my time. I have a lot of research to do. |
|
|
Global Warming Hoax Skeptic before it was cool
WA, USA
|
[#41]
Originally Posted By Logan45: https://www.ar15.com/media/mediaFiles/214097/IMG_3553_jpg-3218667.JPG Dad found these cans of shot in his store room and gave them to me today. He used to reload shotgun shells a long time ago. A whole bunch of #5 shot and the can on the right is about half full of 7.5 or 8, not sure exactly as both numbers are written on the can. I don't know what press he has, but its at his buddies house and I can get it whenever I want. I have a bunch of 20 gauge AA hulls I've saved over the years, and I think some of the powder I have would be suitable for shotguns. Only real cost would be primers, wads, and my time. I have a lot of research to do. View Quote Complete instructions. |
Selling agent for Algores carbon credit scam.
Shooting and Reloading, one hobby feeds the other. |
[#42]
|
|
“How dare we whine at our inevitable return to that prior state from which the vast majority have never stirred?”
|
[#43]
So, I started reloading shotshells because, well, reasons. I was looking for the cheapest possible ammo and that was the way.
Because I was rocking on the cheap, I was using any powder, hulls, primers, wads and shot I could find and having to redo my load every time I got something new. Except I found that ALOT of loads were similar enough to be basically interchangable. I standardized on 1-1/8 shot using Winchester/Claybuster white wads. Primers made absolutely no difference. Some hulls were looser and ended up slightly slower, some were tighter and went a bit faster. The only adjustment I had to make was for different powders. Even that I was able to simplify down to 3 basic settings (bushings) for the dozen powders I tried. Not all of the loads were optimum, but I stayed away from max loads, preferring 1150-1200 fps. I was not chasing perfection, I was chasing "goes bang every time" and that I got. Some of the fudds that I was shooting with were horrified at my casual attitude, but it worked. Reloading shot shells is not voodoo, so if you are loading for a modern shotgun made out of real steel, and not some Damascus antique, you can experiment Now I load less quantity than before, but I load alot more variety. I load Slugs, Buckshot, duplex and shot loads. I now own a shot maker, can cast 3 different slugs and 4 kinds of buckshot. I still only hunt clay birds and steel but I have learned how to load heavy rounds for spinners, accurate slugs for 100y+ iron maidens, light fast loads for aerial targets, and slow heavy loads for steel knockdowns. The exact same powder and wad is good for both 1-1/8 shot, 9 pellet "O" buck loads and even A 7/8 oz slug + 3 "O" buck pellet duplex load. 7/8 oz Slugs and 1oz shot similarly can use the same load. As always, be smart, because your mileage may vary.... |
|
|
[Last Edit: WeimaranerDad]
[#44]
I got some parts in from Dillon.
First up, new rubber snubbers: Attached File Soooo….silly me! What I thought were white rubber particles being scraped off my original snubber was actually white talcum powder. The new snubbers were coated or covered in talcum powder. Yeah, I was puzzled too, so I had to google it. Talcum powder is used to add some lubricity to the gum rubber. It may also aide in keeping static electricity from building up. Anywhooo….of special note….the packaging label says Revision B. EDIT: and SL900D2. And the W: line says SL900-A2 I also got in a smooth crimp starter. Yes, my press was brought new and it came with one: Attached File Again, I found the designation on the label of “SL900B1” interesting. I’ll be saving this second smooth crimp starter for another project. Lastly, I got a new tip out wad guide arm (TOWGA) : Attached File See the designation on the label? “SL900-C1” I’ll be back in a few hours to post how that new TOWGA works. |
|
|
[#45]
Originally Posted By AeroE: Similar, not as much taper and sized for 28 gauge hulls. The spindle through the center is a long screw, probably a #8. The crimps start to close after the first reload so nothing will fit through the opening. https://www.ar15.com/media/mediaFiles/348/1000000839-3215606.jpg Ignore the extra nuts. Drill the hole first, then shape around that centerline. @WeimaranerDad @FB41 View Quote Thanks for posting that pic. That makes more sense. |
|
|
Global Warming Hoax Skeptic before it was cool
WA, USA
|
[#46]
In for good results.
|
Selling agent for Algores carbon credit scam.
Shooting and Reloading, one hobby feeds the other. |
[#47]
Originally Posted By dryflash3: In for good results. View Quote Thanks for the good vibes, but I am thinking it is not going to be today. Unfortunately. The issue I am having is that the Remington STS hulls vary so much in length: Attached File Attached File Such that the shorter hulls have clearance under the tip out wad guide: Attached File But the longer hulls can’t make it under the TOWG: Attached File That tilts the hull away from the TOWG and/or keeps the TOWG from being centered directly over the hull’s mouth. One can absolutely crush a hull with an off center wad….that still gets filled with shot. Don’t ask me how I know that. This is a known issue. Here is a screenshot from a thread in December 2016: Attached File |
|
|
[Last Edit: WeimaranerDad]
[#48]
It appears that Dillon sent out the exact same size TOWGA as the original:
Attached File Attached File And yes the pivot holes for each are in the same location: Attached File Attached File |
|
|
[#49]
I have a few possible solutions in mind.
I’m gonna sit on my “thinking chair” for a while and noodle it over. THEEE absolute last thing I wanna have to do is start trimming hulls: Attached File Or measuring each hull and separating them into piles: 1. Just right And 2. Too long |
|
|
[#50]
Dillon called me Tuesday afternoon/evening.
The rep wanted me send both tip out wad guide arms to Dillon. He said something about their engineer grinding or milling some metal off. The rep was about to email a shipping label. I said “Wait. Give me a day or two. I will email you back.” I went to the hardware store thinking I could cobble together a fix. I bought some stuff. Then as soon as I got in the car, it hit me: “Do I still have a belt sander handy?” Sure enough, I clamped to belt sander in a vise, and the buzzed off the bottom of the wad guide sleeve. I got it so close and then took a hand file to it: Attached File |
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.