User Panel
I'm sure someone will be along to ask how it shot and say it's a tool.
With modern machining and at $1500 there are no excuses. |
|
|
My King Cobra is flawless and it was $500 cheaper. I guess I was expecting the same here. I’m going to shoot it and make sure the sight isn’t just off but if it isn’t or it needs to go more to the right my OCD couldn’t handle it
|
|
|
Send it to Colt and tell them you want a new barrel installed and tell them your concerns why. Gives us a full report on the progress.
|
|
|
Originally Posted By FullAssault: My King Cobra is flawless and it was $500 cheaper. I guess I was expecting the same here. I’m going to shoot it and make sure the sight isn’t just off but if it isn’t or it needs to go more to the right my OCD couldn’t handle it View Quote I completely get it. I would definitely be sending it back. |
|
|
My LGS is sending one back for the same reason. Unreal.
The $700 Ruger GP100 I just bought shoots great. |
|
Nobody is coming. It's up to you.
|
Just sent my new Anaconda back for a bad barrel too. Yours looks pretty good compared to mine (excuse the phone picks).
Attached File Attached File |
|
|
That sucks! That’s way off center. I end up shaving my front sight and shimmed the rear. it’s not centered but at least it’s not pegged. It’s still shooting a left at 25 yds but dead on at 15 so not sure if that’s me or the sights. I ran out of ammo before I could get it sorted out. At this point it shoots decent enough. It bugs the piss out of knowing it’s not perfectly straight but it would bug me a lot more if I sent it off for 2/3 mo and I got it back with an off center bbl or something. I’m thinking I might just keep it as is and live with it. Has anybody returned one to colt recently and got it back?
|
|
|
fuck that If you can't shoot it at 25 yards, how are you gonna hunt deer with it. a good magnum revolver, and some practice, should be able to get hits way beyond that |
|
|
That is a shame that quality assurance passed that. My Python was perfect, as you should expect for the cost.
|
|
Be the change you want in this world.
|
I really don't understand garbage barrel work, from Colt, or anyone else for that matter. They have been doing it for what, 150+ years? It just isn't that damn hard other then some lazy shit worker [and inspector] not bothering to check his tooling and line the barrel and his cutter up correctly. If they could do it BY HAND for decades and decades, doing it on a machine that is [supposedly] incredibly more precise should be a walk in the park.
I was pretty excited when Colt [well, not REALLY Colt anymore] started making revolvers again but I have decided that I'm pretty happy with my old ''imprecise'' ones that somehow are FAR more precise then the new ones. My OMP Colt barrel looks like it was cut with a billion dollar laser compared to the new ones. |
|
Liberals are a curious mix of communism and fascism, they want to destroy you but want to use your own money to do it.
I'd rather be CALLED a fascist then BE a liberal. |
My Python looked fantastic and with no QC issues to see.
However, it wouldn't cycle, halfway through trigger pull or pulling hammer it hit a wall. If you gave the cylinder a little tiny help it would go. Then that problem stopped and turned into light primer strikes via double action. It's currently at Colt, it's frustrating but I'm not upset, still want an Anaconda. |
|
|
Are these AC200XXX or AC000XXX guns?
|
|
|
AC229XXX, I found with 240gr my rear sight didn’t need to be almost pegged to the right (still not perfectly centered). I decided to slap an RMR on it rather than take a chance of getting back more jacked up.
|
|
|
Originally Posted By ag04blast: I'm sure someone will be along to ask how it shot and say it's a tool. With modern machining and at $1500 there are no excuses. View Quote This. Pure and simple. It’s a sad state of affairs in the gun industry and hobby that we are afraid to send guns for warranty work in fear they will come back worse. |
|
|
I sent my Python in for repair, it came a bit off, the hammer was locking up. 30 days later it was back and excellent.
Also finally got an Anaconda, damn it’s awesome. |
|
|
Update to my Anaconda issue above:
I sent the gun back to Colt for barrel replacement in early March. I was told we’ll let you know when it’s done, don’t need to keep checking back for updates. Well, after 6 months I got pissed and called last week. The customer service guy was shocked when I told him it was 6 months, looked up the repair and put me on hold for a bit. He came back to the phone and said something about getting with the production manager to get this resolved. Yesterday I got what I thought was my gun back from Colt, but they sent me a new gun with paperwork saying the first gun was scrapped. I’ve sent a couple guns back for repairs before but never had one replaced yet. I looked it over, and it looks and functions as it should. |
|
|
I had a Colt Mustang replaced that way back in the early 80's. The frame was a bad casting with little pitting on it but not from rust. Colt just sent me a new one.
|
|
|
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.