User Panel
Posted: 1/8/2020 2:26:08 PM EDT
What group size at 100 should be able to reach 1000?
1/4, 1/2? |
|
@AKsala ~ With white privilege comes white responsibility.
|
Originally Posted By CPT_CAVEMAN:
What group size at 100 should be able to reach 1000? 1/4, 1/2? View Quote |
|
|
1MOA is a 10.5 inch area @1000.
Having a 1/2moa rifle/load combo isnt going to subtantially increase your chances of hitting in that same 10.5in area at that range unless you can cover the environmental factors. 1MOA or less is enough to get the job done at 1000 unless you are playing with varmints or bragging rights. Also, a good 100 yard load may fall apart at 800 yards giving you no predictable results for 1000 yards. |
|
|
How big is your target?
The farther out you get the less group size at 100 matters within reason(you'll have a tough time with 5moa groups) When 1mph wind= 7"-10" of drift, when your velocity spread =+/-8" elevation, shooting 1moa vs. 1/2 moa isn't going to make much difference. If you are good with wind and have tight loads then you see more benefit from small groups. On my budget-ish(not cut rifled bbl) ARs I seek at least 1moa 10+shot groups and low ESs(mid 20s) and low SDs(10 or less). When analyzing loads, I might not choose a load that shoots the best groups if it has crappy SD and ES numbers. The load that shoot 1/4-1/2 moa worse but has very tight velocity spreads may make tighter groups at 1000. On my bolt action that has a good barrel and a bunch of money in it I strive for 3/8-5/8 moa because I expect more. I can really see the difference between the rifles when shooting sub moa targets 400-700 yard. |
|
|
If you think you have a 1/2 MOA rifle, or can shoot 1/2 MOA, you'll find out the ground truth at 1000 yards.
Shooting at 1000 yards involves many more factors than shooting at 100 yards. |
|
Grab life by the pussy!
Single men in barracks don't turn in to plaster saints. - Rudyard Kipling |
Like grandma wears - depends.
My Tikka CTR in 6.5C is .4 - .8 moa at 100 yards with a 10 shot group. It also hits 8-10 out of 10 on a 10” plate at 1000 yards. Point is, an efficient bullet will/should maintain close to 1 moa at 1000 yards. What’s your set up? |
|
10/22/14 I stand with Canada
|
Originally Posted By uglygun:
1MOA is a 10.5 inch area @1000. Having a 1/2moa rifle/load combo isnt going to subtantially increase your chances of hitting in that same 10.5in area at that range unless you can cover the environmental factors. 1MOA or less is enough to get the job done at 1000 unless you are playing with varmints or bragging rights. Also, a good 100 yard load may fall apart at 800 yards giving you no predictable results for 1000 yards. View Quote But I guess it still doesn't make sense, since I still wouldn't know until actually shooting it. |
|
@AKsala ~ With white privilege comes white responsibility.
|
Originally Posted By CPT_CAVEMAN:
That's kind of why I'm asking, to try and mitigate that. But I guess it still doesn't make sense, since I still wouldn't know until actually shooting it. View Quote Even well into transonic it should be fine barring a few particular bullets. Bullet shape and/or going transonic or subsonic are the only reasons a good load should "fall apart" farther out. Good load = smaller groups and small velocity spread. A 1 moa load may look like it fell apart at 800 when actually the velocities aren't consistent. One shot is 2800fps, the next is 2740fps, the next is 2810 etc. those hits will be all over from velocity differences that aren't noticed at 100 yards. |
|
|
Originally Posted By Desert_AIP:
If you think you have a 1/2 MOA rifle, or can shoot 1/2 MOA, you'll find out the ground truth at 1000 yards. Shooting at 1000 yards involves many more factors than shooting at 100 yards. View Quote Originally Posted By mustb123:
Like grandma wears - depends. My Tikka CTR in 6.5C is .4 - .8 moa at 100 yards with a 10 shot group. It also hits 8-10 out of 10 on a 10" plate at 1000 yards. Point is, an efficient bullet will/should maintain close to 1 moa at 1000 yards. What's your set up? View Quote |
|
|
Originally Posted By popnfresh:
On my budget-ish(not cut rifled bbl) ARs I seek at least 1moa 10+shot groups and low ESs(mid 20s) and low SDs(10 or less). When analyzing loads, I might not choose a load that shoots the best groups if it has crappy SD and ES numbers. The load that shoot 1/4-1/2 moa worse but has very tight velocity spreads may make tighter groups at 1000. View Quote Groups at 100 yards are only a piece of the picture. I'm looking for a 10 shot ES in the low teens, and a SD of 6 or 7. When I get that, I know the ammo will do for LR. Even 10 shot groups are not the best measure of consistency; 20 shot groups are better yet. Even groups at 300, which is where I zero, don't tell the whole story. I have one rifle that shoots 3/4" 10 shot groups at 100, and ~2" to 2 1/2" at 300 that won't group into 12" at a thousand. ES is about 25 and SD around 13. |
|
|
Originally Posted By CPT_CAVEMAN: What group size at 100 should be able to reach 1000? 1/4, 1/2? View Quote What caliber are you shooting? |
|
Back the Blue
1,000,000 view! Certified LaRue Armorer NRA Benefactor, Team Ranstad, Tennessee Squire |
@AKsala ~ With white privilege comes white responsibility.
|
Originally Posted By CPT_CAVEMAN: 308 Grabbed some ELD X 178s to give a try. View Quote Thanks. Those 178's should work well for you. There was an article, I believe on accurate shooter maybe, that said the difference between hits at 1,000 with a MOA gun versus a 1/2MOA gun was like 12%. Given environmentals, I wouldn't worry and just go do it as you'll learn more through your misses than your hits. |
|
Back the Blue
1,000,000 view! Certified LaRue Armorer NRA Benefactor, Team Ranstad, Tennessee Squire |
168s behind 55g of RL-15 was the sweet spot for my .308
That is until I finally bought into the 6.5...took a quarter grouping down to 1 ragged hole. Haven’t looked back since. Hold 5 in a quarter, get your dope right, read the wind and you’ll be on paper. Hand loads almost a must. Prob stand deviation of +/- 50 fps and you’ll be cooking with gas. Happy hunting! Edit: sight in at 200. saves on optic costs with internal come up later. Edit Edit: oh and point that scope at the ground. 20 moa cant at min. |
|
|
What’s velocity? Have you chrono’d? Send me your altitude and your closest guess on sight in conditions and I’ll make you a dope. That’ll get you close.
40 moa? I likey. You’ll run out of super before come up. Edit: Oh and bullet and BC duh. G1 and G7 if you got em. Edit Edit: and sight height if you got a 40moa. That things gotta be jacked up on stilts. |
|
|
Originally Posted By RifleRob: What’s velocity? Have you chrono’d? Send me your altitude and your closest guess on sight in conditions and I’ll make you a dope. That’ll get you close. 40 moa? I likey. You’ll run out of super before come up. Edit: Oh and bullet and BC duh. G1 and G7 if you got em. Edit Edit: and sight height if you got a 40moa. That things gotta be jacked up on stilts. View Quote When you have your 1000 yard dope, dial to the sheet, and take 10 shots at the quarter. Walk down and measure how far up your group is from center. If it matches what your dope says in drop you’re g2g. Po mans 1000 yards. Big target! |
|
|
An NRA 1000 yard target is six feet square. One MOA at 1000 yards subtends approximately 10 inches. So, 72"/10"=7.2 MOA. Your rifle doesn't have to be spectacularly accurate (although that always helps). Rather, you have to be good at translating conditions into scope adjustments, a master at trigger control, own a scope that has dead-nuts repeatable adjustment, patient shooting buddies, and a calm demeanor to get on paper at 1000.
|
|
|
Originally Posted By RifleRob: When you have your 1000 yard dope, dial to the sheet, and take 10 shots at the quarter. Walk down and measure how far up your group is from center. If it matches what your dope says in drop you’re g2g. Po mans 1000 yards. Big target! View Quote Nice protip. Thanks |
|
In times of universal deceit, telling the truth is a revolutionary act. Orwell
In the absence of orders, go kill something Evil When America goes bankrupt, make those responsible, pay. It ain't the taxing, it's the spending. |
You can have poor velocity extreme spread and shoot sub MOA at 100 with an accurate rifle. Short range groups don’t extrapolate to LR groups.
At LR, the rifle AND the ammo need to be accurate/consistent with small ES. |
|
Dear NASA,
I was big enough for your mom. Sincerely, Pluto |
BikerNut:
Normal people like motorcycles. Real people like motorcycles. People who don't like motorcycles are just... weird. |
Originally Posted By Millennial: You can have poor velocity extreme spread and shoot sub MOA at 100 with an accurate rifle. Short range groups don’t extrapolate to LR groups. At LR, the rifle AND the ammo need to be accurate/consistent with small ES. View Quote Yup. I start at 100 yards. All 10 shots must fit inside a tracing of a quarter. Then, 2 or 300 yards, etc… if the round holds 1 MOA at 1,000 yards, I call it good enough. |
|
10/22/14 I stand with Canada
|
Originally Posted By Millennial: You can have poor velocity extreme spread and shoot sub MOA at 100 with an accurate rifle. Short range groups don’t extrapolate to LR groups. At LR, the rifle AND the ammo need to be accurate/consistent with small ES. View Quote Right right, I mean there's a certain velocity etc. You need to load for which is why I asked about group sizes. And I get that what a gun shoots atv100 yards doesn't necessarily translate to down range due to whatever(weather, shooter fatigue, just whatever). But it should at least give you a good idea of loads to try for further distances. |
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.