PRI folding front sight gas block compatibility

5/14/2024 4:40:16 AM

Hey everyone, I got a 16" pencil barrel on a sale and want to put together a new upper, and was considering getting the PRI&nbs...

Rifle length gas system with carbine buffer

5/13/2024 11:47:59 PM

I want to put an 18 inch 6.5 Grendel upper with a rifle length gas system on a lower that has a standard collapsible stock ...

Current hotness for adjustable gas blocks

5/13/2024 12:49:34 PM

Looking to see what the current hotness is for adjustable gas blocks. Superlative, SLR, etc. Options are somewhat limited by the need&...

Found my Answer

5/11/2024 6:46:21 PM

Found my answer on their website

Bolt Catch installation tool

5/11/2024 2:53:38 AM

Greeting all!So, my efforts to replace what was lost in the burglary continue.One of the little things I had was what I c...

YT Video You re Using a Torque Wrench Wrong MythBusting 10 Do s and Dont s

5/10/2024 6:03:09 PM

Interesting stuff. I was not expecting the anit seize, at 16:39, to affect it so much. Are all my ARs over toque?

Cleaning grease out of a container

5/8/2024 12:33:04 AM

Geetings all!So, my original thread about a nifty container for holding areoshell grease with a brush on the lid was

Easily the dumbest problem I ve ever had stuck gas tube roll pin

5/7/2024 2:07:45 AM

I've never seen any instance where this thing even offers the slightest resistance before...Got a DD MK18 upper, trying to install a&n...

Barrel Blocks to drive out Buffer roll pin

5/6/2024 12:40:50 AM

This is just an FYI... maybe to help a newbie or some seasoned builder with head in his butt like me.I swapped buffer weight...

So I put a carbine barrel on a rifle upper

5/3/2024 4:29:09 PM

I installed a 16" mid length barrel (with M-4 ramps). When I checked for alignment of the barrel extension ramps and the upper cut&n...

Remington Defense R4 stripped upper

4/26/2024 1:48:52 PM

Came across one in my parts bin. No clue where it came from! Other than the R stamped on the rear pin lug and the serial&n...

PSA PA10 stripped uppers

4/24/2024 10:28:47 PM

Bought a PA10 lower a while back for a deep discount to build a cheap AR10, and I�ve just been waiting on the stripped uppers&n...

1 31 diameter barrel nut

4/22/2024 10:09:39 PM

I�ve got a little pet project going and I need a barrel nut with an outside diameter of 1.31� give or take a hundredth. My ...

Best product for touching up scratches on barrel

4/21/2024 3:37:53 PM

I got a little impatient with a relatively tight fitting gas block, and have some striations visible directly in front of the block ...

Does anyone still make an Armalite SR25 pattern forged 80 reciever

4/21/2024 2:02:42 AM

Looking to do a clone build and it seems like this receiver isn�t easy to find online anymore. Specifically a forged one, not&nbs...

lost the bottom pin for help neededI

4/21/2024 1:33:20 AM

I lost the lower pin to my Ballistic Advantage barrel gas block.What size is it?Where can I find a replacement. Any help ...

TLH Tactical

4/17/2024 12:13:44 AM

Has anyone bought from TLH Tactical out of Florida before? They have great reviews on GunBroker, an MOA guarantee, and most of their ...

Modulus Arms Phone Number

4/16/2024 12:11:23 PM

Does anyone have a phone number to these guys? Made a purchase on 4 April, no mention of backorder. Emailed once - no reply, us...

Go to budget LPK

4/14/2024 4:43:18 PM

Title says it all. Who do you go to when it comes to LPK's on the cheap? And, more to the point, how cheap is ...

Looking for ideas on 14 7 FN CHF barrel set up

4/13/2024 5:40:37 PM

I have one of the overruns and when I first got it I thought about adding a FSB, but i never had the guts to try to&n...

Are all lowers equal

4/13/2024 1:44:29 PM

This might be a subject of debate, but hopefully it's not as intense as beans or no beans. I was looking at PSA lowers ...

tightest forged pair

4/10/2024 11:28:16 PM

Don't want to mess around with multiple brands of uppers and lowers trying for a perfect fit. Want the tightest fit possible for&nb...

First 80 some questions

4/8/2024 3:00:43 PM

Recently ordered the 5D tactical jig and bit set. I will be using a Dewalt DWP611. Am I assuming correctly the the end mill it&...

Vibra tite versus anti seize versus areoshell

4/7/2024 2:27:50 AM

I am in the process of building a 6.5mm Grendel. I purchased all Odin Works components. Barrel, Handguard/Barrel Nut, Upper, gas t...

delete

4/4/2024 5:37:40 PM

......

ITFD Binary Trigger Tuning

4/4/2024 1:31:32 AM

Bought a big handful of the ITFD (In The Field Defense)binary assemblies before Bob had to close up shop, installed 2 when I first&n...

Silent capture buffer

4/3/2024 11:42:57 PM

I have got a build that runs good with the adj gas block half open with a carbine tube and h2 buffer.Same deal will not&nbs...

80 lower won t fit into 5d tactical takedown adapter

4/3/2024 11:19:34 PM

Hey guys, I'm working on my first 80% lower with. 5d tactical router jig. I am just putting this thing together and the lower w...

AR15.Com - Build It Yourself