I got all my 9mm brass loaded finally

6/10/2024 5:04:02 AM

I know rookie numbers for some here but I've been chipping away at this for a bit. I don't think ive had all of my b...

Range scrap question

6/10/2024 3:01:25 AM

I�ve always felt like processing range scrap was a PITA using my Lee pot, never felt like I was getting all the lead out of&nbs...

Dillion Square Deal B conversion kit source

6/9/2024 6:05:59 PM

i just bought a SDB in a.44 mag for a semi-reasonable price which is the good news.The bad news is that I do not shoot ...

White River Energetics LR primers any good

6/8/2024 3:39:14 PM

There is currently a severe shortage of LR primers in Finland. In practice, you always have to buy if you can find LR primers s...

APS primer strips CCI strip primers questions

6/8/2024 1:45:03 AM

How long ago did CCI stop making pre-packaged APS-loaded primers, and has anyone seen any in the wild recently? Likewise the empty primer...

Piercing Agula small pistol primers

6/7/2024 8:06:12 PM

Hello Everyone,My go to load for 9mm is a 147g coated lead RN or flat nose bullet loaded to 1.15 OAL with 4.4 grains of...

Reloading 300BO getting a slight ring groove on the bullet

6/7/2024 12:31:49 AM

Hello. Working up a 300BO load using 110gr VMax and H110. Started loading new Starline cases with 19.3 grains. This isn't listed&n...

Really trying to refine my sizing shoulder bump and have narrowed it down to lube

6/5/2024 9:11:07 PM

and the rabbit hole keeps going with it.Right now, I use the Imperial wax which I do NOT move above the shoulder line, and&n...

PSA Hornady 73 eld m 224

6/5/2024 3:45:41 PM

Just a heads up.Found this 87gr .244 VMAX in my 100ct box of 73gr ELD-M.

Where to get replacement parts for Hornady dies

6/4/2024 11:12:08 PM

I assume I have to go through Hornady but last time I ordered from them it was really expensive, as in almost as much as a...

S W Tactical Rifle powder

6/4/2024 8:21:46 PM

hey guy`s,i just picked up the above powder when it came back in stock. (8lbs )i have used it before with 55 & 62 gr&nb...

Done with smelting on to casting

6/3/2024 6:30:17 PM

If you missed the smelting thread, https://www.ar15.com/forums/armory/Did-some-smelting-today/42-552175/

9mm charge advice for a few loads

6/3/2024 2:53:03 PM

Im looking for some powder charge advice for 2 9mm loadings. I will be using HS6 powderThe first being the 124gr RMR nuke ro...

45 70 blue dot

6/3/2024 10:51:00 AM

Have a lb of blue dot. Anyone got a good 45-70 load?Lee340 cast powder coated and 405 cast PC. Rifle is a cva single shot.

300 black out brass resizing settings

6/3/2024 4:27:16 AM

I have reloaded 300blk before and setting up my die on my Redding T7 tonight I have been having problems. I set up die as ...

Packaging disposable bulk loads

6/3/2024 1:57:39 AM

So! I'm an engineer. And getting older ever day, so more idiosynchronous no doubt :) An optimizer. And as a rel...

I m lazy tool recommendations

6/3/2024 1:29:26 AM

I usually set up my table in front of the TV and load away. I've got a bunch of depriming and priming in my horoscope&n...

45 Long Colt Brass Question

6/3/2024 1:01:01 AM

I recently bought 600 pieces of once fired brass. I resized them all. I measured each one. About half were over the max trim le...

Honey badger and Annealeez mini reviews

6/2/2024 10:36:05 PM

So finally got the new brass processing building in a usable state (long way from done)Thought i would finally really put the ann...

I guess ammo maker make more loading mistakes than us How does demill work

6/2/2024 1:34:00 PM

So here lately I have been buying a good bit of demill/pulled components to stock up on (bullets, primed brass, and some powder)....

How much consistency do you think you lose per loading for a semi auto rifle

6/1/2024 7:13:15 PM

I've got several thousand pieces of .223 RP brass that I'm about to load for it's fourth time. Is it worth it at all to&n...

Anyone tried Exakt primers

6/1/2024 4:53:56 PM

Yes I searched didn't see anything [about primers] just someone who tried Exakt .22lr [which is not what I'm looking for].But there&nb...

45aarp accuracy bullet

6/1/2024 4:44:15 PM

Freinds, I want to load some accurate 45acp and perhaps some 45super. So what is a great and accurate bullet, and or brand of&nb...

GREEN DOT powder how does it work in handguns

6/1/2024 4:37:34 PM

I have never used it and hear its perfect for 20 gauge. I dont load much shotgun except making my own slugs from promo loads.

Did some smelting today

6/1/2024 2:16:37 AM

Had some solder I bought at the funshow, took it off the spools.Some WW (wheel weights) couple odd ...

Gunpowder allergy

5/31/2024 6:30:05 PM

Any of you guys have allergic reactions to gunpowder or other reloading/shooting stuff? (not talking about high prices!)I ask because I&nbs...

Help from the group requested Old 40X load data

5/31/2024 12:24:18 AM

My uncle bought a 40X off GB and it came with the group card where the load was recorded, in 1993.Over time the load da...

308 load development with RL15

5/30/2024 5:31:47 PM

Went to range today to test workup load of .308, RL15 with 165gr sierra SP , Rem 9.5 primars and Hornady virgin brass. Ruger...

StaBALL Match load data for 223 308 mid weight bullets

5/28/2024 9:31:01 PM

I just grabbed an 8 pound keg of Midwest MP518 which is supposed to be StaBall Match. It's touted as being great for "heavy for...

62 grain bonded bear claw load development help

5/28/2024 8:20:04 PM

I have a Tommy g36c I am trying to get a consistent 3� or less group at 100 yards with, the barrel is 1/7.So far h...

AR15.Com - Reloading