User Panel
Apex has a lot of goodies in the pipeline. i know how I will be spending my future paychecks.
|
|
LCpl. Nigel K. Olsen March 4th, 2010 Southern Helmand Province Afghanistan
LCpl. Carlos C. Aragon March 1st, 2010 Southern Helmand Province Afghanistan Thanks Hoosier556shooter For The Membership! |
Shit, now I have a decision to make. Aluminum trigger or wait for the polymer trigger. I can get the FSS kit for $120 but do you guys think the polymer trigger will be legal for production class shooting?
|
|
|
Originally Posted By cole_bie:
Shit, now I have a decision to make. Aluminum trigger or wait for the polymer trigger. I can get the FSS kit for $120 but do you guys think the polymer trigger will be legal for production class shooting? Where? |
|
|
Originally Posted By the_outrider27:
Originally Posted By cole_bie:
Shit, now I have a decision to make. Aluminum trigger or wait for the polymer trigger. I can get the FSS kit for $120 but do you guys think the polymer trigger will be legal for production class shooting? Where? I get a discount at a gun store. I went ahead and bought the current FSS. I figure I can always replace the trigger if need be. |
|
|
Is the selling point of the plastic trigger soley monetary?
|
|
|
Originally Posted By Hwhiskey82:
Is the selling point of the plastic trigger soley monetary? Yes, mostly. I have heard people say the aluminum AEK trigger can get hot. |
|
LCpl. Nigel K. Olsen March 4th, 2010 Southern Helmand Province Afghanistan
LCpl. Carlos C. Aragon March 1st, 2010 Southern Helmand Province Afghanistan Thanks Hoosier556shooter For The Membership! |
Originally Posted By TheTacticalCoyote:
Originally Posted By Hwhiskey82:
Is the selling point of the plastic trigger soley monetary? Yes, mostly. I have heard people say the aluminum AEK trigger can get hot. I shot 350 rounds through my M&P9 with the FSS aluminum trigger a couple weeks back, at the end of the 350 I burned off 4 mags as fast as I could. My trigger was warm but not hot |
|
|
Originally Posted By cole_bie: Shit, now I have a decision to make. Aluminum trigger or wait for the polymer trigger. I can get the FSS kit for $120 but do you guys think the polymer trigger will be legal for production class shooting? I was hung up on the price for the AEK trigger, but gave in. Since shooting it, I have zero regrets. |
|
I am free, no matter what rules surround me. If I find them tolerable, I tolerate them; if I find them too obnoxious, I break them. I am free 'cause I know that I am responsible for everything I do.
|
Originally Posted By packingXDs:
Originally Posted By cole_bie:
Shit, now I have a decision to make. Aluminum trigger or wait for the polymer trigger. I can get the FSS kit for $120 but do you guys think the polymer trigger will be legal for production class shooting? I was hung up on the price for the AEK trigger, but gave in. Since shooting it, I have zero regrets. What does it do, exactly? |
|
Do not rejoice in his defeat, you men. For though the world has stood up and stopped the bastard, the bitch that bore him is in heat again.-Bertold Brecht
|
Originally Posted By Combat_Jack:
Originally Posted By packingXDs:
Originally Posted By cole_bie:
Shit, now I have a decision to make. Aluminum trigger or wait for the polymer trigger. I can get the FSS kit for $120 but do you guys think the polymer trigger will be legal for production class shooting? I was hung up on the price for the AEK trigger, but gave in. Since shooting it, I have zero regrets. What does it do, exactly? Reduces pretravel and overtravel. Helps to open the trigger bar loop. |
|
LCpl. Nigel K. Olsen March 4th, 2010 Southern Helmand Province Afghanistan
LCpl. Carlos C. Aragon March 1st, 2010 Southern Helmand Province Afghanistan Thanks Hoosier556shooter For The Membership! |
How can I tell if my M&P has any Apex parts? I bought it used a while back and it has a lot better trigger than my friend's that bought his new.
|
|
|
LCpl. Nigel K. Olsen March 4th, 2010 Southern Helmand Province Afghanistan
LCpl. Carlos C. Aragon March 1st, 2010 Southern Helmand Province Afghanistan Thanks Hoosier556shooter For The Membership! |
Originally Posted By flynlr:
installed the DCAEK in my early build M&P40 yesterday and can only say wow ! what a nice difference. . while installing I came across this bag and only used the smaller of the 2 for the new sear. does anyone know what the larger spring is for?. . i am guessing it's for another model. on a side note. that #%$^@*& sear spring plunger tried to get lost several times. worse than ar detents. . http://www.njrod.com/images/guns/dcaeksprings.jpg Big spring is for newer 2011 to current SHB. Small spring is for older SHB. |
|
LCpl. Nigel K. Olsen March 4th, 2010 Southern Helmand Province Afghanistan
LCpl. Carlos C. Aragon March 1st, 2010 Southern Helmand Province Afghanistan Thanks Hoosier556shooter For The Membership! |
Originally Posted By TheTacticalCoyote:
Originally Posted By flynlr:
installed the DCAEK in my early build M&P40 yesterday and can only say wow ! what a nice difference. . while installing I came across this bag and only used the smaller of the 2 for the new sear. does anyone know what the larger spring is for?. . i am guessing it's for another model. on a side note. that #%$^@*& sear spring plunger tried to get lost several times. worse than ar detents. . http://www.njrod.com/images/guns/dcaeksprings.jpg Big spring is for newer 2011 to current SHB. Small spring is for older SHB. TYVM |
|
AMABO KCUF SYAS HATU
oh and FU A-ROCK and B-ROCK |
Originally Posted By flynlr:
Originally Posted By TheTacticalCoyote:
Originally Posted By flynlr:
installed the DCAEK in my early build M&P40 yesterday and can only say wow ! what a nice difference. . while installing I came across this bag and only used the smaller of the 2 for the new sear. does anyone know what the larger spring is for?. . i am guessing it's for another model. on a side note. that #%$^@*& sear spring plunger tried to get lost several times. worse than ar detents. . http://www.njrod.com/images/guns/dcaeksprings.jpg Big spring is for newer 2011 to current SHB. Small spring is for older SHB. TYVM YWVM. |
|
LCpl. Nigel K. Olsen March 4th, 2010 Southern Helmand Province Afghanistan
LCpl. Carlos C. Aragon March 1st, 2010 Southern Helmand Province Afghanistan Thanks Hoosier556shooter For The Membership! |
Originally Posted By TheTacticalCoyote:
Originally Posted By flynlr:
Originally Posted By TheTacticalCoyote:
Originally Posted By flynlr:
installed the DCAEK in my early build M&P40 yesterday and can only say wow ! what a nice difference. . while installing I came across this bag and only used the smaller of the 2 for the new sear. does anyone know what the larger spring is for?. . i am guessing it's for another model. on a side note. that #%$^@*& sear spring plunger tried to get lost several times. worse than ar detents. . http://www.njrod.com/images/guns/dcaeksprings.jpg Big spring is for newer 2011 to current SHB. Small spring is for older SHB. TYVM YWVM. and now that i know this. is it worth buying a new SHB to upgrade to the larger spring? they are only 22 bucks for the complete assy at midway. and mine is pretty worn |
|
FU A-ROCK and B-ROCK
|
Originally Posted By flynlr:
Originally Posted By TheTacticalCoyote:
Originally Posted By flynlr:
Originally Posted By TheTacticalCoyote:
Originally Posted By flynlr:
installed the DCAEK in my early build M&P40 yesterday and can only say wow ! what a nice difference. . while installing I came across this bag and only used the smaller of the 2 for the new sear. does anyone know what the larger spring is for?. . i am guessing it's for another model. on a side note. that #%$^@*& sear spring plunger tried to get lost several times. worse than ar detents. . http://www.njrod.com/images/guns/dcaeksprings.jpg Big spring is for newer 2011 to current SHB. Small spring is for older SHB. TYVM YWVM. and now that i know this. is it worth buying a new SHB to upgrade to the larger spring? they are only 22 bucks for the complete assy at midway. and mine is pretty worn Do it and if you need a spare you got one now. |
|
LCpl. Nigel K. Olsen March 4th, 2010 Southern Helmand Province Afghanistan
LCpl. Carlos C. Aragon March 1st, 2010 Southern Helmand Province Afghanistan Thanks Hoosier556shooter For The Membership! |
SHB??
|
|
|
Originally Posted By Stopsign:
SHB?? Sear Housing Block |
|
FU A-ROCK and B-ROCK
|
Originally Posted By flynlr:
Originally Posted By Stopsign:
SHB?? Sear Housing Block Yeop, using short hand. |
|
LCpl. Nigel K. Olsen March 4th, 2010 Southern Helmand Province Afghanistan
LCpl. Carlos C. Aragon March 1st, 2010 Southern Helmand Province Afghanistan Thanks Hoosier556shooter For The Membership! |
I did a detailed photo review on the Apex FSS trigger kit a while back which I thought might be a good addition to this thread:
Review of the Apex FSS Trigger Kit for the M&P Pistol |
|
|
I have a question due to the fact that I am a newbie to the M&P world. I just bought a M&P 45C and I was wondering does Apex make parts for the 45C?
|
|
|
Originally Posted By lostboy45:
I have a question due to the fact that I am a newbie to the M&P world. I just bought a M&P 45C and I was wondering does Apex make parts for the 45C? Anything for the FS 45 will fit. See the first post for more details. |
|
LCpl. Nigel K. Olsen March 4th, 2010 Southern Helmand Province Afghanistan
LCpl. Carlos C. Aragon March 1st, 2010 Southern Helmand Province Afghanistan Thanks Hoosier556shooter For The Membership! |
Originally Posted By TheTacticalCoyote:
Originally Posted By flynlr:
Originally Posted By TheTacticalCoyote:
Originally Posted By flynlr:
Originally Posted By TheTacticalCoyote:
Originally Posted By flynlr:
installed the DCAEK in my early build M&P40 yesterday and can only say wow ! what a nice difference. . while installing I came across this bag and only used the smaller of the 2 for the new sear. does anyone know what the larger spring is for?. . i am guessing it's for another model. on a side note. that #%$^@*& sear spring plunger tried to get lost several times. worse than ar detents. . http://www.njrod.com/images/guns/dcaeksprings.jpg Big spring is for newer 2011 to current SHB. Small spring is for older SHB. TYVM YWVM. and now that i know this. is it worth buying a new SHB to upgrade to the larger spring? they are only 22 bucks for the complete assy at midway. and mine is pretty worn Do it and if you need a spare you got one now. I have 6 spare SBH and 6 locking blocks. I have enough spares to rebuild my M&P's 3 times each. |
|
Hansan: "This is a .30 caliber, gas operated, clip fed, semi-automatic rifle....."
Soldier: "Look, you ain't sellin it to me, you're only showing me how it works." Which one is Gene? |
Never mind figured it out, Ill be back though..............
chuck |
|
USAR AGR
12B/19D/79V USAR Pistol Team |
I installed an apex ....carry kit...?.I want to say several months ago. It did improve the trigger, however the reset is still hardly noticeable. Can someone explain how to determine if I can install the RAM or not in my gun? I purchased probably 3 months ago. No thumb safety, no internal lock, no mag lock
Thanks |
|
|
any word on the poly trigger? I havent even gotten my gun from the FFL yet but am ready to do a FSS and RAM job. Would really like to do it all at the same time
|
|
|
Originally Posted By bulletproof210:
any word on the poly trigger? I havent even gotten my gun from the FFL yet but am ready to do a FSS and RAM job. Would really like to do it all at the same time Early next year. Most likely January or February. |
|
LCpl. Nigel K. Olsen March 4th, 2010 Southern Helmand Province Afghanistan
LCpl. Carlos C. Aragon March 1st, 2010 Southern Helmand Province Afghanistan Thanks Hoosier556shooter For The Membership! |
Originally Posted By turbomunkey:
I installed an apex ....carry kit...?.I want to say several months ago. It did improve the trigger, however the reset is still hardly noticeable. Can someone explain how to determine if I can install the RAM or not in my gun? I purchased probably 3 months ago. No thumb safety, no internal lock, no mag lock Thanks You should be good to go adding a RAM. I even put one in my FS 9 that has an otherwise stock FCG - it added positive reset and made the gun much more shootable. (It will get a full DCAEK at some point.) |
|
|
I can't seem to find the answer to this, but will the SHB part number 277640000 from Brownells work with a thumb safety? I want to add a FSS to my M&P9C but it is an older one (2009) with a thumb safety.
|
|
|
I am considering either the FSS or the Comp version. Why do you not like the FSS? I would like to hear your experiences, so that I do not waste my money on buying the wrong one for me.
|
|
|
I've got the FSS and trigger kit in my M&P9. Night and day difference compared the stock trigger. Reset is short, and the break is about as clean as you can get on a striker-fired gun. Not quite a 1911 (it's still got a slightly spongy break), but it's good. I've put a few hundred rounds through the gun since I installed it, and have had no problems. The aluminum trigger with the Glock-type trigger bar safety is much better than the goofy stock hinged trigger.
It is a short and relatively light break though, so if you don't have the thumb safety on there, it might not be the best choice in a carry gun. Otherwise it's a must IMO. |
|
|
Anyone have any idea when they will have the Polymer trigger kit?
|
|
|
Can't wait I have a ram and fss on the way. Hope I made the right decision with the fss
|
|
|
taggage
|
|
I live in a modest home with an immodest array of firearms. NRA Life Member, USPSA Life Member. "We're gonna have peace & I don't care who I have to kill to get it!" - Judge Roy Bean
|
Originally Posted By bulletproof210:
Anyone have any idea when they will have the Polymer trigger kit? Answered a few posts above yours. |
|
|
Originally Posted By GrizzlyAdams:
Originally Posted By bulletproof210:
Anyone have any idea when they will have the Polymer trigger kit? Answered a few posts above yours. Not to be rude but we already passed January or February of this year... |
|
|
Since this thread will remain tacked, I wanted to reiterate my satisfaction with Apex parts.
I recently purchased a 4.25" Pro 9mm. It came with a supposedly lighter pull from the factor which put it in the 5.5 lb. range. It felt decent enough. There was some grit/creep in the trigger but a nice break followed by a soft reset. I purchased a fully machined sear, USB, and RAM for the Pro. I installed those this weekend and the improvement has been substantial. The grittiness in the trigger has been virtually eliminated during the pull. The break is clean and light, and the reset is quite positive. It really has taken an average/mediocre factory trigger and made into something more. Anyone on the fence about Apex should just buy the kit/parts. Installation is pretty easy if you pay attention and take it slow. I just ordered a kit for my Shield. |
|
Sometimes, the only way to convince someone they're wrong is to shoot them in the face.
You have the right to be offended. |
Originally Posted By ninjasteve77:
Originally Posted By GrizzlyAdams:
Originally Posted By bulletproof210:
Anyone have any idea when they will have the Polymer trigger kit? Answered a few posts above yours. Not to be rude but we already passed January or February of this year... Hilton Yam of 10-8 and Modern Service Weapon had a mini preview of it. Hopefully it will be out soon. |
|
LCpl. Nigel K. Olsen March 4th, 2010 Southern Helmand Province Afghanistan
LCpl. Carlos C. Aragon March 1st, 2010 Southern Helmand Province Afghanistan Thanks Hoosier556shooter For The Membership! |
I can outshoot you so there's your title biatch.
OK, USA
|
I've got a new full size M&P 40 with thumb safety that was manufactured in 11/12 iirc. The trigger is horrible, it feels like it's full of kitty litter. The gun is used as a HD gun, range fun and as a carry gun. Which parts or kit doing need to give me a nice smooth trigger with a short reset I can feel? I love this gone otherwise so if I can make the trigger perform, like it should have from the factory, I'll have a near perfect poly gun. Thanks :-)
|
Sic gorgiamus allows subjectos nunc
|
Originally Posted By Brandi:
I've got a new full size M&P 40 with thumb safety that was manufactured in 11/12 iirc. The trigger is horrible, it feels like it's full of kitty litter. The gun is used as a HD gun, range fun and as a carry gun. Which parts or kit doing need to give me a nice smooth trigger with a short reset I can feel? I love this gone otherwise so if I can make the trigger perform, like it should have from the factory, I'll have a near perfect poly gun. Thanks :-) DCAEK is what you seek, friend. I just purchased the Shield carry kit from them and installed the new sear spring, sear, and trigger return spring and it is pretty cool the difference it makes. I have a sight pusher on the way for the Shield to get the USB in there and complete the job. |
|
Sometimes, the only way to convince someone they're wrong is to shoot them in the face.
You have the right to be offended. |
I can outshoot you so there's your title biatch.
OK, USA
|
Thanks, hopefully it will fix the M&P's horrible trigger!
|
Sic gorgiamus allows subjectos nunc
|
Bought a new M&P 45 with the extra threaded barrel.
My trigger gauge scale only goes to 8lbs, has run off beyond 8lbs. M&P45 was noticeably past 8 when breaking, so I figure approaching at least 9lbs. Seems to be a common issue with the 45 variant. Put gun back together and measured break weight after cumulatively doing the following steps replacing S&W factory parts with APEX parts: replaced sear keeping factory sear spring: 5.75 lbs replaced firing pin safety plunger & spring: 4.75 lbs, substantially reduced feel of dragging/interference of trigger takeup replaced striker spring: 4.25-4.00 lbs Hard to get a super consistent reading with the hinged trigger so was a little variable on last weight. Huge improvement in feel, other than reset point not very strong, I think the trigger is now definitely better than a Glock. However, no one will mistake it for a 1911. LGS has one with the Apex trigger installed, definitely an improvement but most of the creep is still there from take up to break point. I kept factory return and sear spring since I haven't decided on ultimate role of this gun and I like my 1911s around 4.5 lbs. |
|
|
Originally Posted By Quake_Guy:
Bought a new M&P 45 with the extra threaded barrel. My trigger gauge scale only goes to 8lbs, has run off beyond 8lbs. M&P45 was noticeably past 8 when breaking, so I figure approaching at least 9lbs. Seems to be a common issue with the 45 variant. Put gun back together and measured break weight after cumulatively doing the following steps replacing S&W factory parts with APEX parts: replaced sear keeping factory sear spring: 5.75 lbs replaced firing pin safety plunger & spring: 4.75 lbs, substantially reduced feel of dragging/interference of trigger takeup replaced striker spring: 4.25-4.00 lbs Hard to get a super consistent reading with the hinged trigger so was a little variable on last weight. Huge improvement in feel, other than reset point not very strong, I think the trigger is now definitely better than a Glock. However, no one will mistake it for a 1911. LGS has one with the Apex trigger installed, definitely an improvement but most of the creep is still there from take up to break point. I kept factory return and sear spring since I haven't decided on ultimate role of this gun and I like my 1911s around 4.5 lbs. That is exactly what the forward set sear and trigger are made for. |
|
"Mental note: Get tat of death star on backside, make starfish the exhaust port." -- Swingset
|
I've had a DCAEK and RAM in my 40c for two years now and really like them.
Last year I picked up a FS 9. I didn't want to stuff a DCAEK into it until I was sure it didn't have any problems, but I did pop a RAM into it right away to have crisper reset. I also ordered a replacement sear housing block because mine turned out to be old stock with the small sear spring hole. I finally got around to ordering a DCAEK for the FS yesterday along with a 10-8 rear (same as what I use on my 40c.) I thought it would be prudent to see how badly jammed up my rear sight was so I could give it Kroil therapy for a week before the parts arrived. Luckily my FS rear popped loose with a few light blows from a sand hammer - I was worried I'd have to do the freezer method or worse. A big +1 for Apex stuff! I like the ergonomics of the M&P enough that I switched from Glock after a long relationship, and Apex has resolved my only real M&P complaint - the crap stock trigger. |
|
|
Installed the APEX FSS on my .40 . I didn't think that the trigger on my 2013 M&P was horrible, gritty but not bad after 10 years of lawyer triggers. Now my M&P is great to shoot instead of meh... It is now about 4-5 lb pull very short travel and reset, does not snap like a 1911 but it is still very predictable. What I don't see improving with the FSS installed is on the subtle trigger reset... but I don't really care about a tactile/audible trigger reset , since the travel is so short I really don't see where a snappy trigger reset would improve my shooting..
|
|
|
Originally Posted By heavyduty:
I've had a DCAEK and RAM in my 40c for two years now and really like them. Last year I picked up a FS 9. I didn't want to stuff a DCAEK into it until I was sure it didn't have any problems, but I did pop a RAM into it right away to have crisper reset. I also ordered a replacement sear housing block because mine turned out to be old stock with the small sear spring hole. I finally got around to ordering a DCAEK for the FS yesterday along with a 10-8 rear (same as what I use on my 40c.) I thought it would be prudent to see how badly jammed up my rear sight was so I could give it Kroil therapy for a week before the parts arrived. Luckily my FS rear popped loose with a few light blows from a sand hammer - I was worried I'd have to do the freezer method or worse. A big +1 for Apex stuff! I like the ergonomics of the M&P enough that I switched from Glock after a long relationship, and Apex has resolved my only real M&P complaint - the crap stock trigger. Mine was built in 2013 (3077) and it came with the small sear spring hole and pin. I was disappointed with that. |
|
|
I am seriously considering the FSS. I hate the trigger on my mp40pro, it smoothed out a bit after 500rds or so, but it still sucks. This may sound weird, but I hate how curved it is, this paired with the hinge makes it uncomfortable for my finger. It sounds like most people are happy with the function of the fss, but does it feel better? Does that make sence?
|
|
|
Have a DCAEK and RAM on order. What tools are necessary to complete the installation?
|
|
|
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.