User Panel
User Panel
User Panel
|
Posted: 4/27/2024 10:36:38 PM EDT
[Last Edit: Princeton]
Just checked and no longer on sale!!!
https://www.dsarms.com/p-17540-ds-arms-sa58-fal-primary-pistol-825-barrel-762x51mm.aspx The catch? It’s a pistol with an 8” barrel! Also, it’s a weekly deal so I don’t know how long the price will last. I have one that I honestly love to shoot. Already did the form 1 and Made it into an SBR. Only down side is if you are planning this route DSA used a pistol lower on this so if you want to eventually put a stock on it you’ll have to swap out the lower for a traditional lower. Here’s mine after converting to a SBR with a Rugged Radiant 762 suppressor.  Attached File |
|
|
|
MO, USA
|
Posted: 4/28/2024 12:39:02 AM EDT
[#1]
Somehow I really want one of those.
|
|
|
|
Posted: 4/28/2024 1:37:17 AM EDT
[#2]
Their pistol to para conversion lower kit is $300
|
|
|
|
|
Posted: 4/28/2024 4:07:02 AM EDT
[#3]
Before doing the SBR paperwork I took it to the shooting range to make sure it w ok I’ll reliably shoot and was very happy with the results.
I hadn’t gotten my suppressor yet so shooting was done with just the flash hider as it came from the factory. I was expecting a huge fireball or it be obnoxiously loud or uncontrollable/uncomfortable recoil and I didn’t notice any of those things. I hadn’t put any sights on it either and was just sighting down the top of the pistol to aim and was only shooting at an indoor range at 20 yards and was able to keep all my shots inside a 3”-4” circle. |
|
|
|
|
Posted: 4/28/2024 9:12:34 AM EDT
[#4]
I’ve wanted a SBr FAL for years. That looks nice.
|
|
|
|
|
Posted: 4/28/2024 1:11:05 PM EDT
[Last Edit: nvcdl]
[#5]
Almost ordered a can of the Hirtenberg 762 but they want $44 to ship it - nope.
|
|
|
|
|
Posted: 4/28/2024 3:08:26 PM EDT
[#6]
Pass.
|
|
|
|
|
Posted: 5/4/2024 2:12:37 AM EDT
[#7]
Quote HistoryOriginally Posted By nvcdl: Almost ordered a can of the Hirtenberg 762 but they want $44 to ship it - nope. Who has this in stock now? |
|
|
|
|
Posted: 5/4/2024 1:58:26 PM EDT
[#8]
Quote HistoryOriginally Posted By Jozsi: Who has this in stock now? https://www.dsarms.com/p-17308-hirtenberger-762x51mm-nato-147-grain-fmj-400-round-can-on-stripper-clips-in-bandoliers.aspx Shipping is expensive though. This is a better deal. Free shipping and I don't think they are charging tax. https://max-arms.com/product/fn-7-62-x-51-nato-linked-500rds-surplus-ammo-copy/ |
|
|
|
|
Posted: 6/2/2024 8:37:49 PM EDT
[#9]
Quote HistoryOriginally Posted By Jozsi: Who has this in stock now? Berdan primers. |
|
|
|
|
Posted: 6/2/2024 9:12:26 PM EDT
[#10]
I added it to my cart and it showed the discounted price of $1049. Now I am going to have an FAL too. Thanks OP for showing me something I didn’t know I needed.
|
|
|
|
|
Posted: 6/3/2024 8:11:53 AM EDT
[#11]
Originally Posted By Princeton: Just checked and no longer on sale!!! https://www.dsarms.com/p-17540-ds-arms-sa58-fal-primary-pistol-825-barrel-762x51mm.aspx The catch? It’s a pistol with an 8” barrel! Also, it’s a weekly deal so I don’t know how long the price will last. I have one that I honestly love to shoot. Already did the form 1 and Made it into an SBR. Only down side is if you are planning this route DSA used a pistol lower on this so if you want to eventually put a stock on it you’ll have to swap out the lower for a traditional lower. Here’s mine after converting to a SBR with a Rugged Radiant 762 suppressor. https://www.ar15.com/media/mediaFiles/1241/IMG_1269_jpeg-3199955.JPG Op, which top rail did you purchase for your gun? I looked on DSA’s site and they have quite a few different ones available. |
|
|
|
|
Posted: Today 12:42:33 AM EDT
[Last Edit: Princeton]
[#12]
Quote HistoryOriginally Posted By onealphay2k: Op, which top rail did you purchase for your gun? I looked on DSA’s site and they have quite a few different ones available. @onealphay2k When I bought my pistol I got a different model from Atlantic Arms that came with the rail cover: https://atlanticfirearms.com/sa58-fal-tactical-pistol DSA Arms does sell a Para Railed top cover, that is most likely what you would need. To be sure though I’d call their customer service and ask which one exactly since there are a couple different ones. Here is a link to one of them that I think should work to replace the non railed cover that comes with the pistol in the original post: https://www.dsarms.com/p-12544-dsa-fal-sa58-extreme-duty-para-scope-mount-standard-length-model-includes-hardware.aspx |
|
|
|
|
Posted: Today 11:32:22 AM EDT
[#13]
Quote HistoryOriginally Posted By Princeton: @onealphay2k When I bought my pistol I got a different model from Atlantic Arms that came with the rail cover: https://atlanticfirearms.com/sa58-fal-tactical-pistol DSA Arms does sell a Para Railed top cover, that is most likely what you would need. To be sure though I’d call their customer service and ask which one exactly since there are a couple different ones. Here is a link to one of them that I think should work to replace the non railed cover that comes with the pistol in the original post: https://www.dsarms.com/p-12544-dsa-fal-sa58-extreme-duty-para-scope-mount-standard-length-model-includes-hardware.aspx Quote HistoryOriginally Posted By Princeton: Originally Posted By onealphay2k: Op, which top rail did you purchase for your gun? I looked on DSA’s site and they have quite a few different ones available. @onealphay2k When I bought my pistol I got a different model from Atlantic Arms that came with the rail cover: https://atlanticfirearms.com/sa58-fal-tactical-pistol DSA Arms does sell a Para Railed top cover, that is most likely what you would need. To be sure though I’d call their customer service and ask which one exactly since there are a couple different ones. Here is a link to one of them that I think should work to replace the non railed cover that comes with the pistol in the original post: https://www.dsarms.com/p-12544-dsa-fal-sa58-extreme-duty-para-scope-mount-standard-length-model-includes-hardware.aspx Thank you. Mine should be here tomorrow, so thanks again for the heads up. Another question. Is it possible to use the existing lower receiver and add the Para stock once the form 1 comes through, or do you need to replace it by buying one with the Para Kit? I was also looking at another option from StormWerkz which allows you to use any 1913 stock, but I think I read that the lower receiver on the pistol is different from a standard one. |
|
|
|
|
Posted: Today 12:29:53 PM EDT
[Last Edit: yamahawarrior89]
[#14]
Quote HistoryOriginally Posted By onealphay2k: Thank you. Mine should be here tomorrow, so thanks again for the heads up. Another question. Is it possible to use the existing lower receiver and add the Para stock once the form 1 comes through, or do you need to replace it by buying one with the Para Kit? I was also looking at another option from StormWerkz which allows you to use any 1913 stock, but I think I read that the lower receiver on the pistol is different from a standard one. Quote HistoryOriginally Posted By onealphay2k: Originally Posted By Princeton: Originally Posted By onealphay2k: Op, which top rail did you purchase for your gun? I looked on DSA’s site and they have quite a few different ones available. @onealphay2k When I bought my pistol I got a different model from Atlantic Arms that came with the rail cover: https://atlanticfirearms.com/sa58-fal-tactical-pistol DSA Arms does sell a Para Railed top cover, that is most likely what you would need. To be sure though I’d call their customer service and ask which one exactly since there are a couple different ones. Here is a link to one of them that I think should work to replace the non railed cover that comes with the pistol in the original post: https://www.dsarms.com/p-12544-dsa-fal-sa58-extreme-duty-para-scope-mount-standard-length-model-includes-hardware.aspx Thank you. Mine should be here tomorrow, so thanks again for the heads up. Another question. Is it possible to use the existing lower receiver and add the Para stock once the form 1 comes through, or do you need to replace it by buying one with the Para Kit? I was also looking at another option from StormWerkz which allows you to use any 1913 stock, but I think I read that the lower receiver on the pistol is different from a standard one. The pistol lower is different. I created a prototype 1913 rear adapter for the pistol lower, will be ready soon:  Attached File Attached File Attached File |
|
|
|
|
Posted: Today 12:36:05 PM EDT
[#15]
I bought a gear logo para recently. Very happy with it so far.
|
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
