User Panel
[#1]
|
|
|
[#2]
Originally Posted By bionicmonkey: Had to make a holster due to the unique shape of my glonk esp with the picatinny and light attached https://www.ar15.com/media/mediaFiles/56039/1000002988_jpg-3202964.JPG https://www.ar15.com/media/mediaFiles/56039/1000002989_jpg-3202965.JPG Interestingly this allows the frame to fit snugly and correctly with or withought the light, rail, or slide even https://www.ar15.com/media/mediaFiles/56039/1000002990_jpg-3202966.JPG https://www.ar15.com/media/mediaFiles/56039/1000002991_jpg-3202967.JPG View Quote How much space/tolerancing did you allow for between the cad of the frame/slide and the cad of the holster prior to printing to test fit? I've been sitting on a draft model for a holster for suppressed Ruger MK4 but haven't dialed in the tolerances yet. |
|
|
[#3]
Attached File
Test fit piece in pla. The real thing will be abs I'll wear the heavy boots when I fire it up with blades attached |
|
|
[#4]
Originally Posted By B320: How much space/tolerancing did you allow for between the cad of the frame/slide and the cad of the holster prior to printing to test fit? I've been sitting on a draft model for a holster for suppressed Ruger MK4 but haven't dialed in the tolerances yet. View Quote View All Quotes View All Quotes Originally Posted By B320: Originally Posted By bionicmonkey: Had to make a holster due to the unique shape of my glonk esp with the picatinny and light attached https://www.ar15.com/media/mediaFiles/56039/1000002988_jpg-3202964.JPG https://www.ar15.com/media/mediaFiles/56039/1000002989_jpg-3202965.JPG Interestingly this allows the frame to fit snugly and correctly with or withought the light, rail, or slide even https://www.ar15.com/media/mediaFiles/56039/1000002990_jpg-3202966.JPG https://www.ar15.com/media/mediaFiles/56039/1000002991_jpg-3202967.JPG How much space/tolerancing did you allow for between the cad of the frame/slide and the cad of the holster prior to printing to test fit? I've been sitting on a draft model for a holster for suppressed Ruger MK4 but haven't dialed in the tolerances yet. It will depend on how accurate your prints are to the model and whether your holster design is split and bolted or not.. but as a starting point i add 1/2 to 1 mm on each side for a snug fit. In this case i measured and modeled the slide and scaled up 1mm and it slides in touching both sides perfect. But i used the model for the frame and didnt check the as-printed. Because it has layers bolted there was some difference there and the first print didnt go so i ended up scaling that up another mm and making some more aggressive cuts for the bolt heads. If you are working from measurements you should be gtg. As mentioned in mine i have a cut and bolts like a traditional kydex to allow final fitment adjustment. |
|
|
[#5]
Originally Posted By Tholo: https://www.ar15.com/media/mediaFiles/246073/20240502_071039_jpg-3203553.JPG Test fit piece in pla. The real thing will be abs I'll wear the heavy boots when I fire it up with blades attached View Quote I can see this going poorly. |
|
|
[#6]
Originally Posted By -Obsessed-: I can see this going poorly. View Quote View All Quotes View All Quotes Originally Posted By -Obsessed-: Originally Posted By Tholo: https://www.ar15.com/media/mediaFiles/246073/20240502_071039_jpg-3203553.JPG Test fit piece in pla. The real thing will be abs I'll wear the heavy boots when I fire it up with blades attached I can see this going poorly. Maybe I'll test it at top speed with the head in a bucket. |
|
|
[#7]
|
|
|
[#8]
Printed in ABS or ASA also
I have some brass bushings to reinforce the pivot on the blade, and 4 mm stainless pins that I'll press though the hub to retain them. |
|
|
[#9]
Unless you have a heated chamber, I'd consider CF petg for that application. Even regular petg printed hot with as little fan as you can get away with.
Abs is likely to split at the layer lines easily without the heated chamber. |
|
Strong men create good times. Good times breed weak men. Weak men create hard times. (You are here) Hard times breed strong men.
|
[Last Edit: Tholo]
[#10]
I was considering cf petg as well. I have both on hand.
The only thing I'm worried about is spinning up the blades and applying a torque where the pivots come down. I could lower the blades to the bottom of the cap if that's a problem. |
|
|
[#11]
Originally Posted By bionicmonkey: It will depend on how accurate your prints are to the model and whether your holster design is split and bolted or not.. but as a starting point i add 1/2 to 1 mm on each side for a snug fit. In this case i measured and modeled the slide and scaled up 1mm and it slides in touching both sides perfect. But i used the model for the frame and didnt check the as-printed. Because it has layers bolted there was some difference there and the first print didnt go so i ended up scaling that up another mm and making some more aggressive cuts for the bolt heads. If you are working from measurements you should be gtg. As mentioned in mine i have a cut and bolts like a traditional kydex to allow final fitment adjustment. View Quote View All Quotes View All Quotes Originally Posted By bionicmonkey: Originally Posted By B320: Originally Posted By bionicmonkey: Had to make a holster due to the unique shape of my glonk esp with the picatinny and light attached https://www.ar15.com/media/mediaFiles/56039/1000002988_jpg-3202964.JPG https://www.ar15.com/media/mediaFiles/56039/1000002989_jpg-3202965.JPG Interestingly this allows the frame to fit snugly and correctly with or withought the light, rail, or slide even https://www.ar15.com/media/mediaFiles/56039/1000002990_jpg-3202966.JPG https://www.ar15.com/media/mediaFiles/56039/1000002991_jpg-3202967.JPG How much space/tolerancing did you allow for between the cad of the frame/slide and the cad of the holster prior to printing to test fit? I've been sitting on a draft model for a holster for suppressed Ruger MK4 but haven't dialed in the tolerances yet. It will depend on how accurate your prints are to the model and whether your holster design is split and bolted or not.. but as a starting point i add 1/2 to 1 mm on each side for a snug fit. In this case i measured and modeled the slide and scaled up 1mm and it slides in touching both sides perfect. But i used the model for the frame and didnt check the as-printed. Because it has layers bolted there was some difference there and the first print didnt go so i ended up scaling that up another mm and making some more aggressive cuts for the bolt heads. If you are working from measurements you should be gtg. As mentioned in mine i have a cut and bolts like a traditional kydex to allow final fitment adjustment. Thanks for the info! I'll keep all this in mind when I pick up the project again. |
|
|
[#12]
Originally Posted By Tholo: https://www.ar15.com/media/mediaFiles/246073/20240502_071039_jpg-3203553.JPG Test fit piece in pla. The real thing will be abs I'll wear the heavy boots when I fire it up with blades attached View Quote That looks perfect for a Nylon application. |
|
|
[#13]
Originally Posted By tnriverluver: Really curious to see if that holds up. I have very little faith in 3D printed stuff used in real life applications. View Quote I printed out wire shelving supports and they are stronger than the originals. Designed properly 3D printed parts can be very strong. |
|
|
[#14]
|
|
"Whoever came up with that video needs Jesus?and some stitches for that blown-out rectum. Ick. "
--system |
[#15]
More parts for HD-22's
|
|
A firearm is like a parachute, if you need one but don't have one, you'll probably never need one again. IG @jimstagramguns
|
[#16]
|
|
A tough man can take a bullet, but a wise man can dodge one. Stay focused my brothers.
|
[#17]
Originally Posted By memsu: That looks perfect for a Nylon application. View Quote Printing a hub in atomic petg cf now. The housing is stamped ABS. I'll try a version in abs too. |
|
|
[Last Edit: Klee]
[#18]
|
|
A tough man can take a bullet, but a wise man can dodge one. Stay focused my brothers.
|
[#19]
|
|
|
[#20]
May be stuck using nylon
|
|
Strong men create good times. Good times breed weak men. Weak men create hard times. (You are here) Hard times breed strong men.
|
[#21]
It failed without any layer separation, but it was too brittle.
I fattened up the blades a little and the next pass will have 6 walls and 6 top and bottom layers. I'm going to try nylon CF and ABS (unfilled). Otherwise, the string trimmer part still works. |
|
|
[#22]
|
|
Strong men create good times. Good times breed weak men. Weak men create hard times. (You are here) Hard times breed strong men.
|
[#23]
|
|
A tough man can take a bullet, but a wise man can dodge one. Stay focused my brothers.
|
[Last Edit: Kharn]
[#24]
I've been playing with a 0.2mm nozzle, 0.08mm layer height, 40mm/s printing minis for tabletop war gaming with PLA+. (At least until I get a resin printer)
From the same roll of filament, during the same print, I'll get partial clogs and excessive stringing when running the same temperature. It's a total pain in my ass, including two ruined 42+ hour prints. I think it's just the cheap IIID Max rolls I bought on a huge sale years ago which I'm now using up. I dehydrate each roll for 8-24 hours at 54C before printing and continuously while printing. Maybe I need to splurge on better stuff until I switch back to 0.4mm Factory mini in front, printed gator behind. The gator is one 60mm base for scale, and this was the better attempt. One foot and the tip of the tail both just broke off in my hands when I was removing the supports. The other print was completely trash, an arm broken off, huge sections of partial clog, etc. Attached File Some of the good ones, the white ones were fresh Esun PLA+ from Amazon that month which had complete clogs a few times. The green were also old IIID Max which also suffered partial clogs: Attached File Kharn |
|
|
[#25]
The first few rolls of IIID Max I tried were pretty good, but then constant issues. I still have boxes of them I'm not going to bother with I'll be throwing away.
|
|
Strong men create good times. Good times breed weak men. Weak men create hard times. (You are here) Hard times breed strong men.
|
[#27]
Originally Posted By TODD-67: Siraya Tech Mecha resin. Very low friction resin with high accuracy. This stuff is great for gears and other parts that demand high accuracy and low friction. It does not powder when put under load like a lot of other resins do. Very hard surface finish and an almost polished appearance right off the printer. https://hosting.photobucket.com/images/gg8/tspiegelberg/sirayatech.JPG View Quote I need to break open my resin printer again. I'm glad to see resin tech moving forward. |
|
Strong men create good times. Good times breed weak men. Weak men create hard times. (You are here) Hard times breed strong men.
|
[#28]
Originally Posted By Rat_Patrol: The first few rolls of IIID Max I tried were pretty good, but then constant issues. I still have boxes of them I'm not going to bother with I'll be throwing away. View Quote I tossed 27 of the 30 rolls I bought. You must have forgot my struggles I chronicled a couple years ago. |
|
|
[Last Edit: Kharn]
[#29]
Originally Posted By -Obsessed-: I tossed 27 of the 30 rolls I bought. You must have forgot my struggles I chronicled a couple years ago. View Quote View All Quotes View All Quotes Originally Posted By -Obsessed-: Originally Posted By Rat_Patrol: The first few rolls of IIID Max I tried were pretty good, but then constant issues. I still have boxes of them I'm not going to bother with I'll be throwing away. I tossed 27 of the 30 rolls I bought. You must have forgot my struggles I chronicled a couple years ago. Mine is probably from 2020 or 2021. What's a good brand for use with a 0.2mm nozzle? A coworker suggested Overture. But I may just switch back to a 0.4mm nozzle and print the terrain and such for the game, abandoning efforts for the minis themselves until I paint down the pile that I already have purchased or printed. Someday I'll get the area under my basement stairs walled in to hold all my 3d printing stuff in there, with its own vent fan, and a second vent run for the resin printer's grow tent. Kharn |
|
|
[#30]
Originally Posted By Kharn: Mine is probably from 2020 or 2021. What's a good brand for use with a 0.2mm nozzle? A coworker suggested Overture. Kharn View Quote What material? Overture is okay. Not great, not terrible. The most consistent are going to be 3DFuel and Prusament for PLA. Polymaker is decent but they aren't quite as consistent as they used to be. Numakers has been decent for me but some printers don't like it. My Prusas hated it but Bambu loves it. For PETG I'd be looking at Prusa, Atomic, and 3DXTech if you want maximum consistency. |
|
|
[#31]
Originally Posted By Rat_Patrol: I need to break open my resin printer again. I'm glad to see resin tech moving forward. View Quote It is moving forward rapidly on the desktop units in both the printers and the resins. I am running a 12k printer and it is pretty much obsolete compared to the newer offerings in terms of features. The only downside to resin is you have to hit it with a UV inhibitor if the parts will be exposed to sunlight. It literally takes a couple of minutes with an airbrush. The thing I like about them is that you can fully use the entire print volume without worrying about print failures. I printed out some parts for a show last week that were so tall they did not come out of the vat completely when they were finished. There were (2) parts that were about 12" tall 3" wide and 6" across. FDM is still a very viable option but it has it's limitations as well. I am just happy for the options on the cheap like we are getting now. |
|
|
[#32]
Originally Posted By Rat_Patrol: The first few rolls of IIID Max I tried were pretty good, but then constant issues. I still have boxes of them I'm not going to bother with I'll be throwing away. View Quote Yeah, it prints good till it doesn't. I had 4 rolls out of 10 that had me chasing z banding issues. Looked exactly like severe z banding. Turns out filament diameter variation was from 1.5mm to 1.85mm. Put known good filament in and printed perfect again. Numakers is my preferred filament for price/performance now. |
|
|
[#33]
|
|
|
[Last Edit: -Obsessed-]
[#34]
Originally Posted By 2JokersWild: Printed a toy jeep. My first multicolor print. https://i.imgur.com/B50NtI8.jpg https://i.imgur.com/erLNDhO.jpg https://i.imgur.com/Es7epqc.jpg View Quote You have some serious underextrusion issues. ETA: fixed autocorrect. |
|
|
[#35]
Did a vertical antenna loading coil, also parts for a clamp-on tripod. ASA with a 0.6 nozzle.
Attached File Attached File Attached File |
|
|
[#36]
Originally Posted By -Obsessed-: You have some serious understanding extrusion issues. View Quote View All Quotes View All Quotes Originally Posted By -Obsessed-: Originally Posted By 2JokersWild: Printed a toy jeep. My first multicolor print. https://i.imgur.com/B50NtI8.jpg https://i.imgur.com/erLNDhO.jpg https://i.imgur.com/Es7epqc.jpg You have some serious understanding extrusion issues. *underextrusion. Good job autocorrect. |
|
|
[#37]
|
|
|
[#38]
Originally Posted By nikdfish: Did a vertical antenna loading coil, also parts for a clamp-on tripod. ASA with a 0.6 nozzle. https://www.ar15.com/media/mediaFiles/128622/PXL_20240506_183516945_b_jpg-3207835.JPG https://www.ar15.com/media/mediaFiles/128622/PXL_20240507_140321356b_jpg-3207836.JPG https://www.ar15.com/media/mediaFiles/128622/PXL_20240507_140256766b_jpg-3207837.JPG View Quote Fantastic job! That is a loading coil that should work. What diameter is the coil form and what spacing on the windings? |
|
Tennessee Squire
|
[Last Edit: homeyclaus]
[#39]
|
|
In case you're wondering about the avatar pic:
https://www.youtube.com/watch?v=Z4ARGjbA14g |
[#40]
Originally Posted By SandHillsHillbilly: Fantastic job! That is a loading coil that should work. What diameter is the coil form and what spacing on the windings? View Quote Core is 37.5mm (1.5"). 70 wraps across 240mm distance, works out to be ~3.4mm interval. Groove is about 1mm deep. Wire is tinned 16 awg copper buss wire. |
|
|
[#41]
Originally Posted By nikdfish: Core is 37.5mm (1.5"). 70 wraps across 240mm distance, works out to be ~3.4mm interval. Groove is about 1mm deep. Wire is tinned 16 awg copper buss wire. View Quote |
|
|
[#42]
|
|
|
[#43]
Originally Posted By 2JokersWild: Printed a toy jeep. My first multicolor print. https://i.imgur.com/B50NtI8.jpg https://i.imgur.com/erLNDhO.jpg https://i.imgur.com/Es7epqc.jpg View Quote I printed a bunch of these (single color) and gave them to friends at work. |
|
The hardest part about a zombie apocalypse will be pretending I'm not excited.
|
[#44]
|
|
|
[Last Edit: Klee]
[#45]
|
|
A tough man can take a bullet, but a wise man can dodge one. Stay focused my brothers.
|
[Last Edit: bradbn4]
[#46]
Printing some clips for a 80/20 - 30 series metal frame.
I figure I need 3 so I will print 4 different styles with about 2 - 6 of each. I found a few different styles on printables and I figure I would print out a handful. I had a few old ones from the mfg, but it seems they have a duty rate of about 4 add & remove cycles. It is about 60% finished with this set.....I will give them a whirl to see if they will hold up prior to final installation. Too bad I don't have an ASA setup yet - but that is what these clips will help me get to. Attached File |
|
The last thing a tyrant wants is their ideas to be judged on the battle field of truth and justice.
|
[Last Edit: nikdfish]
[#47]
I put a description, source & STL's for the screwdriver build on printables.
https://www.printables.com/model/873376-screwdriver-style-antenna-for-portable-use-100uh-l ETA I put files & pictures of the 26 uH tripod base loading coil on printables https://www.printables.com/model/875179-portable-loading-coil-vertical-antenna A 46 uH versioin of the tripod base loading coil was also put on printables, but not yet printed : https://www.printables.com/model/875229-portable-vertical-antenna-loading-coil-base-46uh |
|
|
[Last Edit: Tim_AZ]
[#48]
Have to use X to show the video. Still a work in progress. All printed on my X1 and P1Ps.
|
|
|
[#49]
Originally Posted By Tim_AZ: Have to use X to show the video. Still a work in progress. All printed on my X1 and P1Ps.
View Quote Cool! |
|
|
[#50]
A champion of "khorne"
First try at a complicated model. .4 nozzle at .15 layer height, 35mm speed 215c hot end 55c bed Going to try lowering the temp and speed a hair and see how it compares. Attached File Mostly interested in doing functional prints. This is just for experience building |
|
Never confuse faith that you will prevail in the end—which you can never afford to lose—with the discipline to confront the most brutal facts of your current reality, whatever they might be. - Adm James Stockdale
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.